Trouver Tungsten Carbide Brazed Inserts Carbure Brazed T, Conseils En Brasure De Carbure De Tungstène Yg6 Type C125, L Shapes Tungsten Carbide Brazed Tips dans le répertoire Industry, Reliable Fabricant / Fournisseur / Factory de Chine

Panier (0)
Accueil > Liste de Produits > Inserts brasés au carbure Conseils en brasse > Conseils sur le carbure de carbure de tungstène

Conseils sur le carbure de carbure de tungstène

Informations de base

Modèle:  Yg6X Yg6 Yg8 Yg10 Yg15 etc

Description du produit

N ° de modèle: Yg6X Yg6 Yg8 Yg10 Yg15 etc Taille: Petit type: tête de traduction de précision Certification: ISO 9001: 2008 Spécifications: carbure de tungstène Impression de logo: Sans impression de logo Personnalisé: Matériel personnalisé: Métal Marque déposée: ZZ HARDMETAL Origine: Zhuzhou Description du produit
Avantage:
1. Plus de 15 ans d'efforts pour fabriquer des produits en carbure de tungstène de haute qualité.
Presque 7 ans en faisant des opérations d'importation et d'exportation.
2. Expérience riche en recherche de grade, conception de moules, presse automatique,
HIP fritté, traitement de surface et contrôle de qualité.
3. Des notes différentes sont disponibles.
4. Large stock pour commander à la fois. Des quantités de petites quantités sont acceptées.


Détails:
1. La note pour les pointes / inserts brasés au carbure de tungstène est comme ci-dessous le tableau:
D'autres grades pour les inserts brasés en carbure de tungstène peuvent être offerts selon les exigences des clients.

2. TYPES: On peut offrir différents types, le type A, le type C, le type E, la norme ISO ou la norme européenne.
D'autres types de barres peuvent être offerts selon les exigences des clients.


3. Conditions commerciales:
1,10% - 30% de dépôt et le solde contre l'expédition.
2. Commencer à produire après le dépôt.
3. Prenez des photos pour la confirmation des clients
4. Les acheteurs paient le solde
5. Nous expédions les marchandises selon une méthode agréable par Express, AIR ou SEA.
6. Les commentaires des clients sont très importants pour notre amélioration!
Conditions de paiement flexibles: O / A, L / C, D / A,
GRADE ISO
GRADE
DENSITY
(g/cm3)
HARDNESS
(HRA)
TRS
(N/mm2)
Applications recommended
YG3 K05 15.10 92.0 1400 Suitable for finishing of cast iron and nonferrous metal.
YG6X K10 14.95 91.5 1800 The finishing & semi-finishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel.
YG6 K15 14.95 90.5 1900 Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
YG8 K20 14.80 89.5 2200
YW1 M10 13.10 91.6 1600 Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel.
YW2 M20 13.00 90.6 1800 The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs.
YT15 P10 11.4 91.5 1600 Suitable for the finishing and semi-finishing for steel and cast steel with a moderate feed rate and rather high cutting speed.
YT14 P20 11.6 90.8 1700 Suitable for the finishing and semi-finishing of steel and cast steel.
YT5 P30 12.9 90.5 2200 Suitable for the heavy duty rough turning of and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions.



Si vous avez des questions, n'hésitez pas à nous contacter, nous vous répondrons immédiatement, tks!

Personne à contacter: Emily

Groupes de Produits : Inserts brasés au carbure Conseils en brasse

Envoyer à ce fournisseur
  • *Sujet:
  • pour:

  • *Messages:
    Votre message doit comporter de 20 à 8000 caractères